HomeTermsOrderContact UsCatalogInformationAbout Us

End your beer foaming problems or
Retrofit an old Kegulator with a
KegMan Foam Buster or Busterette Kit

Stop foamy beer in the cheap quarter keg Chinese knock off beer dispensers or retrofit you Good Ol' American Kegger to obtain the perfect pour every time at a proper 12 psi pressure. Actual hardware may vary slightly from these pictures due to use of many different Standard American manufacturers' products.
Foamy Beer solution for caused by chinese parts in your direct draw ynit.
9899 Foam Buster above.
When your old tower is gone.		   Solution for foamy beer caused by older worn or Chinese parts.
9896 Foam Busterette above.
Why buy the tower when you can use the old one?

Stops Foam Problems Dead
or Just Retrofit an Old Kegger!

        KegMan Products retrofit kits will fix any problem you have in a new or old kegger, tapster, or bar mobile.
  • Our Full kits contain a full commercial 2Æ" Chrome Tower with Faucet, beer line and tower shank, a Lever Keg Coupler, a tap handle and a clamp for your gas line.
  • Busterette kits contain a faucet, beer line, tower shank, a Lever Keg Coupler, tap handle and clamps for your lines.
        Our fix both Chinese knock off parts problems and old warn-out systems both with All American components from the faucet to the keg coupler. Real American bar equipment manufactured in the USA to a professional standard allow you to pour a perfect beer every time.
        Which one to choose. The choice is yours but remember to check your unit before ordering to see if your beer line is bent over so as to pinch the flow. If it is you will have to order the kits with either the beer elbow or the low-boy coupler to solve this problem.
        When retrofitting an older USA unit you may also want to order new 7080 air line since sometimes in older systems beer gets up into air lines.

Retrofit Kits with Chrome Tower

Part
Number		 Description Price
US $
9899 Foam Buster Full Kit with the DT Lever Keg Coupler pictured at top Left of page $101.12
9893 Foam Buster Full Kit with the 8261 BEER ELBOW for keggers with very little head space. $122.32
9897 Foam Buster Full Kit with the 8012 PERLICK LOWBOY coupler for no head space in tapper $129.93

Retrofit Kits w/o Chrome Tower

7920 New! All Stainless Steel (S/S) Retrofit Kit w/o Tower:
The perfect way to upgrade your commercial kegger to an all stainless steel beer serving machine. This kit contains a 303 stainless steel tower shank (8702), keg coupler (8014), 6 feet of beer line (1800), Perlick S/S forward seal faucet (4020)and clamps for a perfect pour at 12 psi. Will remove all brass contamination from the beer flow. A chrome plated brass tower is included to replace damaged OEM tower if required.		 $126.70
9896 Foam Busterette and Tapper Retrofit Kit: pictured at top of page $78.54
9892 Foam Busterette Mini Kit with beer elbow 101.75
9894 Foam Busterette Mini Kit with Perlick LowBoy coupler 108.51

Other Parts used in options

beer elbow The (p/n 8261). beer elbow. Some discount store keg refrigerators are so cramped that they will bend the beer line over crimping it and impeding the beer flow. The kits supplied with this will solve the bending over and crimping the beer flow problem.
beer LowBoy Coupler Perlick Low Boy Coupler which has an exit out the side instead of the top of the coupler will only extend a ½" above the keg rim.

If you keg touches the cooling metal block in the back of your fridge it may cause the beer to freeze and make for foaming. Call your refrigerator service department for how to move this plate. Frozen beer will foam and eventually ruin the beer.

 

Return to Top of Page.

 

  Copyright © 1997 - 2007 Crossfire Engineering Inc.
 
Webmaster