HomeTermsOrderContact UsCatalogInformationAbout Us

traditional beerengine banner beuv22 beer engine

Traditional & Simulated
Beer Engines


.Beer Engines come in two models and cannot be interchanged. Both models look exactly the samewith a ½ pint stainless steel cylinder, the traditional mahogany plinth, stainless steel front and northern style swan neck. See picture on the left.
  • Item 6501 is a Traditional English Pub clamp-on Beer Engine. These are for cask conditioned ales only and cannot be used with normal keg beers. Before buying one of these Traditional engines be sure to check the beer distributers in you r area to see if they have cask conditioned ales.
  • Item 6502 is a Simulated English Pub clamp-on Beer Engine designed specially for pressurized systems. These simulate the operation of the "'Traditional" beer engine without the cylinder. They have an internal flow control valve to increase or decrease the beer flow rate to compensate for different keg pressures.
Item
Number		Item DescriptionPrice
US $
6501Traditional Homark 1/2 pint cylinder Beer Engine for cask Conditioned Ales ONLY!. - Special Order Item$846.32
6502Simuilated Homark Beer Engine for Pressurized Kegs. Such as Bud, Miller, Coors etc. - Special Order Item$846.32

Beer Engine Accessories and PartsTaps & Faucets

All beer engine items listed below have a minimum order quantity of $150.00 US. This minimum order is required to cover import costs, shipping & special ordering.
Prices lowered November 12, 2007 because of new minimum order amount of $150.00 US.
PictureItem
Number		Item DescriptionPrice
US $
ferkin breather 6534cask breather $143.90
plastic breather spile 6535plastic breather spile $41.90
plastic faucet 6510Plastic Tap single outlet gate valve with 3/8 hose barb $49.40
  6511Plastic Tap double outlet gate valve with 3/8 hose barb $67.40
plastic faucet 6512Plastic Faucet gate valve for direct pouting from the cask or ferkin $69.20
stainless steel faucet 6515Stainless Steel Single Outlet Gate Valve with 3/8 hose barb $278.00
s/s bent elbow tap 6516Stainless Steel single outlet gate valve with bent elbow for direct pouring from the cask $281.60
white sparkler 6506Sparkler-White Standard .7mm holes $22.87
sparkler 6507Sparkler-Black Loose - 2 full open half circles $22.87
wooden shive 6521Wooden Shive Bore: 2-1/16" $2.87"
wooden shive 6522Wooden Shive Bore: 2-1/8" $2.87"
plastic shive 6523Plastic Shive Dual Bore: 2-1/16" & 2-1/8" $2.87"
#2 faucet plug
6527Wooden Faucet Standard Plug No. 2 $1.60
6528Plastic Faucet Standard Plug No. 2 $1.60
tap hole cork 6529Cork Faucet Hole Plug $0.48
Wooden Hard Spile
6525Wooden Hard Spile $1.00
6526Wooden Soft Spile $1.10
tap hole cork 6530Stainless Steel Hop Filter $1.70
check valve 6535Check Valve to control the flow of product and preevent hammering on the beer engine
This check valve is required when the cask is located above the engine.		 $134.90
no-return valve 6536Inline Non-Return Valve for use with beer engines that do no have built in check valve $116.90
pub brand marker 6537Pub Clip, Oval for brand identification.
Just paste the lable on the face and change as necessary		 $35.90
Faucet Parts
6513plastic 3/8" hose barb $8.62
6514plastic nut - 3/4" BSP $8.62
6517s/s 3/8" hose barb $11.12
6518stainless steel hose elbow $26.12
6519chrome nut - 3/4" BSP $16.12
Cylinder
Rebuild
Seals & O-Rings
6504Homark 1/2 pint cylinder rebuild kit for all Homark
EXCEPT Homark Universal Deluxe		 71.90
6505Homark 1/4 pint cylinder rebuild kit for all Homark
EXCEPT Homark Universal Deluxe		 71.90
6503Homark 1/2 pint cylinder rebuild kit
ONLY for Homark Universal Deluxe		 71.90