HomeTermsOrderContact UsCatalogInformationAbout Us


Stainless Steel Jockey Boxes

1 Faucet Coil Boxes
2 Faucet Coil Boxes
3 Faucet Coil Boxes
S/S Coils & Fittings
Coil Box Hookups
Cold Box Accessories		 Cold Plate Box

1 Faucet Cold Plate Box
2 Faucet Cold Plate Box
Cold Plates & Fittings
CP Box Hookups
 Pre-Mix Soda Box

Pre-Mix 1 to 6 Faucet Cold Plate Box
 Related Items

CO2 Cylinders
CO2 Regulators
Beer & Gas Hose
Booster Boxes
Electric Flash Chillers

Beer Coolers, Beer Boxes, Jockey Boxes, Draft Boxes or Cold Boxes.

There are two types of Beer Boxes or Jockey Boxes. These are the Cold Plate Cooler & the Coil Cooler. Both are used in party, picnic or special event environments to quickly chill warm beer to the ideal dispense temperature of 36-38°F. Each has specific benefits and liabilities.
cold box / coil box / draft box coolers With a coil cooler, the beer is run through a length stainless steel coil that is covered with ice and water. The ice water coming in contact with the coil causes the coil to become cold, which in turn causes the beer running through the coil to become cold. The coils vary in length from 50’ to 120’ depending on the model of coil cooler. The advantage of a coil cooler over a cold plate cooler, is that the coils are longer then the tubing in the cold plate. This allows the beer a longer contact time in which to become cold. Therefore Coil coolers are recommended over cold plate coolers when it is impossible to keep internal keg temperature colder then 55° F. With a 120’ coil cooler, beer can be continuously dispensed from the faucet at 36-38° F even if the keg is at room temperature. A disadvantage is that careless handling of ice can damage the exposed coils.
cold box / coil box / draft box coolers COLD PLATE COOLERS or cold boxes - With a cold plate cooler, the beer is run through a aluminum cold plate that is covered with ice. The ice coming in contact with the plate causes the plate to become cold, which in turn causes the beer running through the plate to become cold. It is important to continuously drain the melted ice water from the cooler, and periodically push the ice down on the cold plate surface as it will occasionally bridge up and lose contact with the plate. The typical 10" x 15" cold plate has 18’ of stainless steel tubing within the plate that beer goes through. A cold plate coolers is only recommended for use when the beer temperature can be kept colder then 55°F. In such a case, beer can be continuously dispensed from the faucet at 36-38°F.

Tips for coil and plate cold boxes:
  • Clean with B*L*C* after every use.
  • Before disconnecting the keg, bleed off excess CO2to 10­12 psi to prevent over carbonation of any remaining beer.
  • Cold plates must be in contact with ice only (no water) in order to function properly. Coils should be kept under water with ice always present in the water.
  • Order keg connector(s) (beer taps), Jumper(s) (jumpers are beer line with nuts, nipples and washers at both ends), CO2Regulator & CO2tank. All cold boxes come with faucet(s), faucet knob(s), internal hoses, couplers, coils or cold plates.
  • Colors available are Red or Blue with White Tops but are not always available. All colors are not always available and we will substitute another color when required.

Single Product Stainless Steel S/S Coil cold box and draft boxes

These coil beer boxes come complete with all internal lines and connections to the outsides only. Complete Hookup kit and CO2 Cylinder are required to funtion. Please order separately for your needs.

DescriptionPart NumberPrice
8 Quart with 50 foot coil and beer shank inlet & outlet. Requires a draft tower with faucet and single keg hookup kit to function. 1520$165.00
28 Quart with 50' SS Coil box comes with a 1 chrome faucet. Hookup kit and faucet knob are required to funtion. 1521$179.19
28 Quart with 70' SS Coil box comes with a 1 chrome faucet. Hookup kit and faucet knob are required to funtion. 1522$240.19
48 Quart with 120' SS Coil box comes with a 1 chrome faucet. Hookup kit and faucet knob are required to funtion. 1523$288.00
Return to Top of Page.

Dual Product Stainless Steel Coil cold box and draft boxes

These coil beer boxes come complete with all internal lines and connections to the outsides only. Dual Hookup kit and CO2 Cylinder are required to funtion. Please order separately for your needs.
DescriptionPart NumberPrice
2P 28 Quart with 50' & 70' SS Coils 1526$404.49
2 Faucet 48 Quart with 2 120' SS Coils 1527$574.71
2 Faucet 68 Quart with 2 120' SS Coils 1528$631.03
Return to Top of Page.

Three Product Stainless Steel cold box and draft boxes. These coil beer boxes come complete with all internal lines and connections to the outsides only. Three Hookup kit and CO2 Cylinder are required to funtion. Please order separately for your needs.
DescriptionPart NumberPrice
3 Faucet 100 Quart with 3 120' SS Coils 1530$875.51
Return to Top of Page.

Cold Plate Beer Box

Cold plate coil boxes all come with faucets, shanks, cold plate rack, jumper line, cold plate rack and internal beer lines are included. Complete Hookup kit and CO2 Cylinder are required to function. Please order separately for your needs.
Note: A cold plate should never sit in water and the keg must be kept below 58°F. to assure a cold beer in the glass. Keep the ice compartment drained.
Single Faucet, One ProductPart NumberPrice
1 Faucet 48 Quart with 10x15 cold plate 1542$299.51
Dual Faucet Description Part NumberPrice
2 Faucet 48 Quart, with 10x15 cold plate 1545$349.44
Return to Top of Page.

Pre-Mix Soda Cold Plate Boxes

Rugged, high impact box with durable exterior. Choose from two to Six Soda Faucets.
Pre-Mix Cooler DescriptionPart NumberPrice
2 Faucet Cooler. With ¼" MFF inlets & Pre-Mix Dispensing Valves1525 $334.95
3 Faucet Cooler. With ¼" MFF inlets & Pre-Mix Dispensing Valves1525 $487.38
4 Faucet Cooler. With ¼" MFF inlets & Pre-Mix Dispensing Valves1525 $584.32
5 Faucet Cooler. With ¼" MFF inlets & Pre-Mix Dispensing Valves1525 $699.38
6 Faucet Cooler. With ¼" MFF inlets & Pre-Mix Dispensing Valves1525 $817.05
Return to Top of Page.


Draft Box Hook-ups


For all coil and cold plate boxes on this page.
Contains the regulator, hose(s), fittings, jumper(s), black plastic faucet knob(s), American Sankey Keg Connector(s) & clamps required to be operational. These prices are for hook-ups ordered with cold box. If ordered separately add $15.00 to the prices listed. With our hookup all you supply is the beer and the CO2Tank.
15618Hook-up for 8 quart Coil Box. A draught tower is required to attach to the 8 Qt. outlet but is not supplied with this kit. $87.05
1561Complete Hook-up for 1 Faucet 25 & 48 Qt. Coil Box $87.05
1562Complete Hook-up for 2 Faucet 25 & 48 Qt. Coil Box $150.41
1563Complete Hook-up for 3 Faucet 94 Qt. Coil Box $204.02
1564Complete Hook-up for 1 Faucet Cold Plate Box $75.12
1565Complete Hook-up for 2 Faucet Cold Plate Box $126.54
7914Empty new Aluminum 5 pound CO2 Cylinder when puirchased with hook-up kit and cold box for $59.95
Return to Top of Page.

Cold Box Accessories
Jumpers are not required for cold plate cold boxes.
1571Jumper for Coil Box to Keg Connector
6 feet of 3/8 Beer Line w/connections		$17.79
1572Jumper for Coil Box to Keg Connector
10 feet of 3/8 Beer Line w/connections		$21.44
1573Jumper for Coil Box to Keg Connector
12 feet of ½ Beer Line w/connections		$24.84
1574Jumper for Coil Box to Keg Connector
18 feet of ½ Beer Line w/connections		$30.12
Return to Top of Page.

Return to Top of Page.
  Copyright © 1996 - 2007 Crossfire Engineering Inc.
 
Webmaster