HomeTermsOrderContact UsCatalogInformationAbout Us


M System Flat Top German Keg
 

German Slider System M coupler
for some Deutscher Flat Top Kegs.


The German System M Slider Coupler is used to tap some imported German Flat Top Kegs. Do not confuse this with the German System A Slider coupler for most imported German flat top kegs introduced into the North American market. This A coupler is for the specific beers listed below. The A lever draft beer keg tap, is shown as a stand alone beer keg connector. It may be ordered by part number 8076 & 8077 as needs require. Check Tap by Brewery for the kegs which use this tap. All our keg couplers are selected from the finest the brewing industry has to offer. They are equipped with integral safety relief valve which will prevent internal keg pressures from rising above the 50-60 psi level. This relief device will also allow relief of coupler pressure after the coupler is disconnected from the keg. All our couplers are designed for maximum flow in either single or series keg dispensing. All but the twin probe have a backflow check valve on the gas and liquid side to prevents liquid from reentering the keg or gas line.

The keg coupler is the piece of equipment that attaches the gas line and beer line to the beer keg. The gas line from the Co2 tank's regulator connects to the larger 5/16 tail piece on the side of the coupler opposite the lever. The beer hose going to the beer faucet's shank tail piece also attache to the keg coupler at the top.
All keg couplers come with a 5/16" gas hose tail piece on the side. Only the assemblies come with a 3/16" tail piece on the top beer side. Stainless Steel tail pieces are supplied with all s/s couplers.
We have specific couplers designed for both beer and wine kegs. Beer kegs can use any of the couplers but all USA commercial establishments are now required to use stainless steel for the lower pH of beer. Wine requires either a plastic probe coupler or a 304 stainless steel (S/S) coupler.
A full coupler assembly comes with the beer nut, and 3/16 nipple and a beer washer if required. All stainless steel and wine coupler assemblies come with the stainless steel nipple as well as a beer nut and washer.
Some System "D" and "S" couplers can be supplied with different color handless for large quantity orders to aid bar managers in distinguishing beers in a large cold rooms.
Micromatic M beer tap

Mfgr.: Micromatic
Name: System M Lever Coupler with S/S Probe
Metal: Plated Base
Assembly / $: 8076 / $84.01ea
Tap Only / $: 8077 / $78.72ea
Picture above: 8077
Description: Most popular lever beer tap used by many major breweries and taverns.

M System Flat Top German KegList of Beers in the Americas Using the German System A Keg Coupler
Be sure to check with your beer distributor before ordering this coupler. There is also a System A Slider Coupler coupler for German Flat Top Kegs.
  • Aventinus
  • Einbecker
  • Schneider
  • Veltins
  
We are not responsible for typographical errors in prices or descriptions. Pictures may not correctly represent color or form.
Absolutely no returns after 30 days for any reason. Orders canceled within three days of invoice date may be given a full refund. Items returned after 3 days will be given a store credit less a 30% restocking fee and no cash refund will be offered.
Only items that are not a SPECIAL ORDER items are eligible for return and must be in new and unused condition. No special order items may be returned for any reason other than manufacturing defect - be sure before you order it.
Prices may change without notice due to economic conditions. You must be over 18 years of age to order from the KegMan. All orders without an open account will have a 4 percent handling charge on all items plus shipping, insurance and surcharges. Shipping and handling charges are never refundable.
 
 
Copyright © 1996 - 2007 Crossfire Engineering Inc. (CEI) & CEI Sites

 

Webmaster