| Paint Ball Cylinder Menu |
|---|
If you have a club or group and buy 10 of any one item on this page we will give you and additional 10% off your parts prices.
|
|
Paintball CO2 Fill Stations
Paintball CO2 cylinder/bottle/tank refilling and support equipment. These Fill Stations are May be either National Paint Ball (NPB) Fill Station or 32 Degree brands at our discretion based on availability at time of order. The two brands of fill stations are interchangeable and most parts are the same except for the ball valve color. Both types of ball valves have a 1000 WOG for safe filling and handling. These PB fill stations require a source of liquid CO2 for refilling. Any gas CO2 cylinder can be used in the field by inverting it so liquid will come out. For stationary use a 20 or 50 pound syphon (liquid) tank is best since it will not have to be inverted. Note:These refill stations will only refill paint ball cylinders due to the special O-Ring configuration used in their sealing in the marker and the universal fill adapter. See Other Re-fillers for Standard CGA-320 valve refilling as used in beverage serving, carbonating, transmission shifting etc. Click on any picture to see an enlarged and clearer view!Caution: Never fill any CO2 cylinder by time or guess - a scale must be used to insure a safe fill.You can use the digital scale below or just a simple fish scale available at any hardware store; just use a scale or loose a blow-out disk. | |||
 |
In Stock Basic Paintball Single Valve CO2 Cylinder Fill Station w/CO2 Pin Depressor. This is perfect for personal use for filling one or two tanks a day. 1000 psi WOG brass valves. For use indoors only. Not for outdoor operation.Instructions. | 5261 | $57.79 |
 |
In Stock Deluxe Professional Paintball Two Valve CO2 Cylinder Fill Station w/CO2 Pin Depressor. This has two ball valves for great filling performance. This is perfect for all high volume paint ball filling without muffler. 2000 psi WOG Aluminum valves..Instructions. | 5263 | $79.95 |
 |
In StockDigital Hanging scale for proper paint ball cylinder refilling. Using a Fill Station without a scale is just not smart. It can cause injury or damage to your equipment. An overfilled tank is a danger to itself and all around it. Hint: Most individuals can just use a simple hardware store hanging fish scale or a postage scale but whatever your need, use a scale. | 5266 | $47.78 |
| Return to Top of Page. | |||
Scuba cylinder Refill StationThe part number 5227 32 Degree cylinder refill station will attach your 3000 or 4500 psi paint ball cylinder to a high pressure scuba cylinder. The #5227 is equipped with both tank couplings and a mini gauge to read the pressure. |
|||
|---|---|---|---|
 | Scuba Fill Valve Special Order) - The scuba fill valve is a easy answer to gain access to a scuba tank for filling with compressed air. | 5227 | $66.23 |
Refill Station Parts There is a $15.00 US minimum order on all small parts. | |||
 |
In StockUniversal Fill Adapter with pin valve depressor and 1/8"FNPT air line port will replace all fill stations worn adapters. This is used by many to serve CO2 for many reasons to very unusual places from paint ball cylinders. | 5223 | $14.63 |
 |
* * * Not Available * * * 32 degree Stainless Steel Fill Adapter is functionally the same as the 5223 above but is stainless steel instead of anodized aluminum. | 5224 | $21.99 |
 |
* * * Not Available * * * Fill Station Muffler | 5221 | $19.95 |
 | |||
|
Uni-fied Burst Disk - Co2 One Piece (3K) 37-1-B/O DSK UF 3 For use with all CO2 cylinders. Also for use with output pressure on Nitrogen systems. In Stock | 1905 | $4.52 | |
| Special Order * * * Minimum order $25.00 * * *Uni-fied Burst Disk-Threaded and Stamped -5000psi For bottle pressure on a 3,500 psi rated Nitrogen system only. NOT for use with Air America Screw'N Air Nitrogen systems. |
1900 | $4.52 | |
| Special Order * * * Minimum order $25.00 * * *Uni-fied Burst Disk Threaded and Stamped -7000psi For bottle pressure on a 4,500 psi rated Nitrogen system only. NOT for use with Air America Screw'N Air or Empire Fuel Nitrogen systems. |
1901 | $4.52 | |
| Special Order * * * Minimum order $25.00 * * *Uni-fied Burst Disk - 3000 psi One Piece (5K fine thread) [A/A & FUEL] 37-1-B/O DSK UF A01 For bottle pressure on a 3,000 psi rated Air America Screw'N Air |
1902 | $4.52 | |
| Special Order * * * Minimum order $25.00 * * *Uni-fied Burst Disk - 4500 psi One Piece (7.5K coarse thread) 37-1-B/O DSK UF 4.5K For bottle pressure on a 4,500 psi rated Nitrogen system only. | 1903 | $4.52 | |
| Special Order * * * Minimum order $25.00 * * *Uni-fied Burst Disk - 4500 psi One Piece (7.5K fine thread) [A/A & FUEL] 37-1-B/O DSK UF A02 For bottle pressure on a 4,500 psi rated Air America Screw'N Air or Empire Fuel Nitrogen system only. | 1904 | $4.52 | |
 | |||
| In StockWhite Urethane bottle o-rings. | 5067 | $0.75 | |
| In StockWhite Urethane bottle o-rings (ten pack) . | 5068 | $3.80 | |
 |
In StockCO2 Nut Wrench Inexpensive (let's be honest: They are Cheap!) 3 shown but priced individually |
5056 | $4.46 |
| Return to Top of Page. | |||
Kegman Products has always been a leader in the sale of CO2, O2, N2 and Nitrous Oxide NO2 gas services. We do not sell the gases but we sell everything that has to do with the gases. WE sell high pressure hose, flexible lines, re fillers, dispersion stones for oxygenation and carbonation and regulators. If you need anything to do with a gas part, Contact Us and we can help.
While KegMan Products is not a Paint Ball stocker if your club or group would like to buy ten or more of any paint ball item or uniform Contact Us and we can get it for you fast and inexpensively.