Regulator Notes
NOTE 1: Before operating any regulator read the Instruction Manual.
NOTE 2: The bulk of the carbon dioxide (CO2) in a cylinder is liquid CO2, only the head space of the tank contains gas. These cylinders are constant pressure cylinders as long as there is liquid in the cylinder. When the liquid has all evaporated there is nothing left in the tank but the CO2 in the gaseous state. As long as the cylinder contains any amount of this liquid the regulator's high pressure gage will only read full. The high pressure regulator gage does not represent anything but the tanks temperature when liquid is present in the tank. When the liquid is depleted, the pressure will rapidly decline to zero. Only 50 pound and larger cylinders will contain enough gas to supply a reserve to tide you over till a refill can be obtained. The high pressure gauge will never represent the quantity of liquid carbon dioxide remaining in the tank. The amount of liquid carbon dioxide remaining in a tank can only be is determined by the weight of the tank less the tare weight (TW) of the tank. The tare weight is printed (stamped) on the neck of the CO2 bottle or tank.
NOTE 3: CO2Gas Regulators. All the CO2 regulators have CGA 320 fittings for USA & Canada. A CGA-320 fitting has a 0.825-14 NGO-Right Hand Thread. Countries outside the USA and Canada also use this fitting but you will have to check with your local gas company to see if your country complies with the CGA standard. All CO2 and beer gas regulators come with a shut off and a 5/16 inch hose barb on the outlet. Pictures may vary from actual hardware shown. |
| All standard regulators carry a manufacturers' 1 year materials and workmanship warranty. These regulators have a 55 - 65 psig non-adjustable safety relief valve. These regulators all mate with the CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks found in most parts of the world. |
Pictures shown may not exactly depict the items shipped due to manufacturer changes. |
Part
Number | description | Price
US $ |
|---|
| 6311 | Standard 1 Gauge Regulator - The perfect regulator for CO2 cylinders under 50 pounds where knowing you are out of liquid CO2 is not sufficient warning to get a new cylinder. | $40.24 |
| 6312 | Standard 2 Gauge Regulator - For all 50 pound and larger cylinders where there is enough time to order a refill after the liquid CO2 runs out. | $46.24 |
| 6320 | Standard 2 Gauge w/2 shut-offs Regulator
For serving two kegs of beer from one CO2 cylinder. | $61.43 |
| 6318 | Standard 2 Gauge 2 Pressure Regulator
For serving two different pressures from the same CO2 Cylinder. | $75.75 |
|
Pictures shown may not exactly depict the items shipped due to manufacturer changes.
Micromatic Premium Primary Beer RegulatorsAll standard and premium regulators carry a Micro Matic 3 year materials and workmanship warranty. The standard regulators are produced in the USA while the premium ones are produced in Germany. These regulators have a 55 - 65 psig non-adjustable safety relief valve. Both regulators are giving years of faithful service in bars and taverns around the world. These regulators all mate with the CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks found in most parts of the world. |
Part
Number | description | Price
US $ |
|---|
| 6321 | Premium 1 Gauge Beer CO2 Regulator | $62.62 |
| 6322 | Premium 2 Gauge Beer CO2 Regulator | $70.27 |
| 6323 | Premium 2 Gauge w/2 shut-offs Beer CO2 Regulator | $80.85 |
|
| KegMan N2 and Beer Gas High Pressure Regulators |
|---|
Pictures shown may not exactly depict the items shipped due to manufacturer changes. |
Part
Number | description | Price
US $ |
|---|
| 6371 | High Pressure (10-100) Nitrogen N2 Regulator
2 gauge, 10-100 psig.
Mate with: CGA 580: 0.965-14 RH-INT Tanks
This is the Regulator for Stout and lager beer gas mixes. | $72.60 |
| 6379 | Beer Gas (10-55) Regulator
2 gauge, 10-55 psig.
Mate with: CGA 580: 0.965-14 RH-INT Tanks
This is the Regulator for Stout and lager beer gas mixes. | $72.60 |
| 6317 | High Pressure CO2 Gas Regulator, 2 gauge 10-100 psig
Recommended for use with Gas Blenders, 10-100 psig outlet pressure. Mate with CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks | $72.60 |
| 6371 | Wine Gas Regulator
2 gauge, 10-100 psig.
Mate with: CGA 580: 0.965-14 RH-INT Tanks
This is a Nitrogen Regulator for serving wine without carbonating the beverage. | $72.60 |
|
Soda CO2 RegulatorsSoda Regulators come with the same CGA-320 fitting but have a 1/4 Male flare fitting on the outlet instead of the 5/16 inch hose barb of the beer regulators. |
|---|
Pictures shown may not exactly depict the items shipped due to manufacturer changes. |
Part
Number | description | Price
US $ |
|---|
| 6314 | Dual Gauge Soda CO2 Regulator (10-110psi)
| $57.13 |
| 6325 | 1p Secondary Soda CO2 Regulator (0-15psi)
| $50.32 |
| 6326 | 1p Secondary Soda CO2 Regulator (0-60psi)
| $50.32 |
| 6327 | 2p Secondary Soda CO2 Regulator (0-60psi)
| $53.71 |
| 6328 | 2p Secondary Soda CO2 Regulator (0-60psi)
| $58.45 |
| 6329 | 2p Secondary Soda CO2 Regulator (0-60psi)
| $61.37 |
| Return to Seltzer Page |
|---|
|
| Standard Secondary Regulators with 5/16 hose barb inlet and outlets |
|---|
Pictures shown may not exactly depict the items shipped due to manufacturer changes.
Please add "PT" to part number if you would like a pass through hose barbe instead of the plug on the secondary regulator. |
Part
Number | description | Price
US $ |
|---|
| 6340 | Secondary HP 1 Product 1 Pressure 100psi | $38.86 |
| 6341 | Secondary 1 Product 1 Pressure 60psi | $38.86 |
| 6343 | Secondary 2 pressure 2 products 60psi | $70.39 |
| 6344 | Secondary 3 pressure 3 products 60psi | $109.42 |
| 6345 | Secondary 4 pressure 4 products 60psi | $148.45 |
| 6346 | Secondary 5 pressure 5 products 60psi | $179.98 |
|
Secondary Regulator Panels
with beer line wall brackets
|
|---|
Pictures shown may not exactly depict the items shipped due to manufacturer changes. |
Part
Number | description | Price
US $ |
|---|
| 6352 | Secondary Panel 2 pressure 2 products | $119.98 |
| 6353 | Secondary Panel 3 pressure 3 products | $174.89 |
| 6354 | Secondary Panel 4 pressure 4 products
Shown on left. | $228.64 |
|
Secondary Regulator Panels
with beer line wall brackets, beer jumper lines and pressure lines ready to install as is.
|
|---|
Pictures shown may not exactly depict the items shipped due to manufacturer changes. |
Part
Number | description | Price
US $ |
|---|
| 6362 | Secondary Panel 2 pressure 2 products | $153.64 |
| 6363 | Secondary Panel 3 pressure 3 products | $203.64 |
| 6364 | Secondary Panel 4 pressure 4 products
Shown on left. | $266.14 |
|
| Stem Washers | Look | Look |
| CO2 Regulator Accessories |
|---|
| description | Part
Number | Price
US $ |
|---|
| CO2 Purifier Assembly with Brass Couplers and Mounting Bracket | 6412 | $66.07 |
| Gauge Cage JE742GC | 6450 | $30.07 |
Solid Brass Regulator Outlet Gas "Y" adapter
Male ¼ NPT to 2 Female ¼ NPT - Will allow 2 Shutoffs on one regulator.
These may be ganged to add many shut-offs to one single output regulator. | 6460 | $13.45 |
| CO2 Shutoff W/Check Valve | 6475 | $20.81 |
| Gauge, Low Pressure R.H.Thread | 6584 | $18.31 |
| Gauge, High Pressure L.H. Thread | 6586 | $27.13 |
| CO2 Stem to convert any ¼ NPT Left Hand Thread high pressure regulator to CO2 | 6601 | $5.96 |
| CO2 Stem to convert any ¼ NPT Right Hand Thread high pressure regulator to CO2 | 6604 | $7.44 |
| CO2 Nut for 6601 above | 6602 | $5.96 |
| 1/4 N.P.T. LH Secondary Regulator Connector. High to High | 6603 | $9.63 |
| 1/4 N.P.T. inch regulator Gauge Plug R.H. | 6655 | $2.03 |
| 1/4 N.P.T. inch regulator Gauge Plug L.H. | 6666 | $2.94 |
| 1 x 1/4 N.P.T. Hose Nipple 618B | 6677 | $3.75 |
| 1/4 x 3/8 Barb Hose Nipple 617C | 6488 | $2.69 |
|
| Aluminum Gas Distributors come in three ways: Please indicate whether you wish relief valve "R", plug "P" or pass through hose barb "T" when ordering by adding R,P or T to part number. |
 |
| description | Part
Number | Price
US $ |
|---|
| Aluminum CO2 Distributer 2-way Assy | 7452 | $39.44 |
| Aluminum CO2 Distributer 3-way Assy | 7453 | $52.20 |
Aluminum CO2 Distributer 4-way Assy
made with Two 7452 units | 7454 | $70.68 |
Aluminum CO2 Distributer 5-way Assy
made with One 7452 and one 7453 | 7455 | $90.33 |
Aluminum CO2 Distributer 6-way Assy
made with Two 7453 units | 7456 | $93.88 |
|
Modular Manifolds / Distributors
Modular manifolds or distributors come in three ways: Please indicate whether you wish relief valve "R", plug "P" or pass through hose barb "T" when ordering by adding R,P or T to part number. |
 |
| description | Part
Number | Price
US $ |
|---|
| Plastic CO2 1- way Distributor. | 7457 | $26.86 |
| Plastic CO2 2- way Distributor. | 7458 | $35.61 |
| Plastic CO2 3- way Distributor. | 7459 | $48.12 |
| Plastic CO2 4- way Distributor. | 7460 | $72.36 |
| Plastic CO2 5- way Distributor. | 7461 | $89.86 |
|
Regulator Repair Kits
These kits are only sold to gas companies and not the public. Thank your local trial lawyers for this. |
|---|
| description | Part
Number | Price
US $ |
|---|
| Repair Kit, regulator Tap Rite | 6335 | $28.28 |
| Repair Kit, regulator Cornelius | 6332 | $25.34 |
| Repair Kit, regulator Micro-Matic | 6336 | $30.28 |
| Repair Kit, regulator ChiCho | 6338 | $30.34 |
|
Return to Beer Tap Index
|