Seltzer or carbonated water is manufactured and enjoyed in every part of the world. This sparkling beverage is both refreshing and medicinal. It is made with both motorized and mon motorized carbonators and you will find a link to the exact seltzer equipment to suit your professional or home requirements. From th simple iSi soda syphon to the self cooling recirculation seltzer systems of K-Way we have it all here.
Soda pop is made from seltzer and flavored syrups. Tonic and club soda is made from seltzer and flavorings. Egg Creams, ice cream sodas, phosphates and more all start with that bubbly effervescent seltzer.
Carbonated Water, Soda, & Seltz Equipment
General seltzer and soda index for the most popular items required for making, serving and enjoying seltzer and soda.If you need help with ordering your seltzer system please call us Noon to Five PM Easter US Time.
Commercial Motorized Carbonators for continuous flow of seltzer. Hookup to electricity,CO2 cylinder, soda regulator cooling and water supply is required.- Typical Motor Carbonator Hook-UpA typical setup is shown for any motorized carbonator.
- Commercial Cooling Equipment for Soda, Syrup, Seltzer & All Carbonated Beverages
- Counter Top Commercial Dispensers
- Soda and Phosphate Kegs etc.
- Refractometers
- Carbonation Level Tester
- Stainless Steel Soda and Seltzer Fittings
- Stainless Steel Carbonator Hook-Up Fittings
- Cold Plates.
- Cold Plate Fittings
- Booster Box required for commercial cooling using ice.
- Stainless Steel Coils for ice water cooling of beer, wine and soda.
- Motorless Carbonators for making seltzer without electricity or water hook-up. Just keep the carbonation tank in a refrigerator or other cold place and occasionally fill with water. CO2 cylinder, cooling and soda regulator required.
- Soda Fountain Kit for making seltzer at home & in small soda shops in a chest freezer (purchased separately). Just keep the carbonation tank in the freezer or other refrigerated place and occasionally fill with water. Used in small stores, homes and portable serving applications by vendors everywhere. CO2 cylinder and cooling required. Freezer thermostat, drip tray,soda draft arm, gas pressure reducing regulator and all hookup hoses are supplied with this kit.
- Seltzer Refrigeration Conversion Kit for making seltzer in any refrigerator. Just keep the carbonation tank in the fridge and occasionally fill with water. Used in many small stores, homes and portable serving applications by vendors everywhere. CO2 cylinder and cooling required. Soda draft arm, gas pressure reducing regulator and all hookup hoses are supplied with this kit.
- Vantage Over-counter Electric Four and Five Valve Soda Dispensers. UL, NSF and CE approved. Complete units with integral carbonator and cooling. Oasis Towers, Touch-o-matic electric faucets, International Carbonic flow valves, post mix dispensing valves, Dole Electric Valves, Flowmatic faucets, WunderBar & Bar Master Wine and post mix guns and all parts are available. Call the KegMan.Shurflow Soda Syrup Pumps Also all pump racks, fittings and accessories are available - call for information.
- Bag-in-Box Syrup Pumps
- Counter Mounted Hand Syrup Pumps stainless steel.
- Seltzer Draft Arm and soda dispensers for counter and through wall applications.
- Water Draft Arms and push back water faucets for through wall and counter top applications.
- Soda & Water Draft Arm washers and Wrenches
- Seltzer Water Filters
- iSi Soda Syphon table model seltzer maker. This requires our 8 gram CO2 chargers. Each charge will produce one liter of lightly carbonated beverage. Again not worth the cost of the gas unless you just want a seltzer bottle on your bar.
- Soda Kegs ball lock and pin lock - 3 and five gallon soda canisters.
- Disconnects - Soda keg connectors for pin and ball lock, Stainless steel and plastic models
- Soda Parts - Soda keg O-rings, seals, poppets
- Old Fashioned SS Counter Pumps
- Flash Chiller for chilling beer, wine and soda electrically from remote areas with line cooling pumps.
Hosesto replace 8, 9, 12, and 20 ounce CGA-320 CO2 Cylinders in seltzer makers, car transmission shifters, etc.Refilling Tools for all CGA 320 CO2 Cylinder CO2 cylinders in seltzer makers, car transmission shifters, etc.Paint Ball CO2 cylinder Refill Stations.Egg Cream - New York Style Basic Carbonator Hook Ups Installing Soda Draft Arm Washers
- Simple CO2 Cylinder Refilling
Instructions.
NOTE: Both motorized and motorless carbonators dispense seltzer at high pressures and require the seltzer output to be cooled to 33-38 degrees F. Failure to have the seltzer cooled will result in flat seltzer in your glass. There are many ways to perform this cooling. Some of the methods are
NOTE: Both motorized and motorless carbonators dispense seltzer at high pressures and require the seltzer output to be cooled to 33-38 degrees F. Failure to have the seltzer cooled will result in flat seltzer in your glass.
CAUTION: Never serve soda or seltzer thru any fitting or faucet which is not specifically designed for soda and seltzer. All seltzer fittings must be stainless steel or an equivalent carbonic acid resistant material. Use only soda and seltzer faucets and stainless steel fittings when using a carbonator. Seltzer is very corrosive and will corrode the metals used in common faucets and brass fittings causing poisoning.