HomeTermsOrderContact UsCatalogInformationAbout Us

Single Column Draft Beer Dispensers


          All KegMan draft dispensing towers and arms are designed for professional usage and should not be confused with the cheap home versions that others may sell. They come complete with faucets, hold down screws and mounting gasket when applicable. The towers do not come with the KegMan No. 8541 faucet knob, please order separately or ask get them from your beer distributer.
          The parts of a draft beer tower or draft beer arm and its sub-assemblies are broken down and displayed in our Tower Parts Page.


          The KegMan has a large selection of Custom Draft Towers for the upscale bar, homeowner, pub, restaurant, and tavern. These are all custom built and may be modified with standard or your own designs. All custom towers are special order and all others will take three (3) to Four (4) weeks for delivery.

Towers on this Page

3" Polished Stainless Steel Towers
3" No Tarnish PVD Brass Towers
2½" Column dispensers
3" Clamp-On Towers
4" Clamp-On Towers
Shotgun Towers
Return to Tower Selection Page.


Chrome Plated Stainless Steel 3" Towers

These 3" draft beer dispensing towers and arms come with mounting hardware and 5 feet of 3/16 I.D. beer line, nut and nipple ready for connection to a keg coupler. These towers are in general about 12 inches tall with the spigot spout being about 9" to 10" from the mounting flange.
description Part Number Price
Draught Technology Chrome Plated S/S Tower with 1 Faucet & hose for Air Cooling - NFS Approved 8651$79.26
Draught Technology Chrome Plated S/S Tower with 2 Faucets & hose for Air Cooling - NFS Approved 8652$100.26
Micromatic Polished S/S Tower, 1 Faucet w/hose for Air Cooling - NFS Approved Special Order 8951$118.64
Micromatic Polished S/S Tower, 2 Faucets w/hose for Air Cooling - NFS Approved Special Order 8952$159.19
Micromatic Polished S/S Tower, 3 Faucet w/hose for Air Cooling - NFS Approved Special Order 8756$279.73
Micromatic Polished S/S Tower, 1 Faucet w/tube Kool-Rite Cooling Ready - NSF Approved Special Order 8751$237.46
Micromatic Polished S/S Tower, 2 Faucets w/tube Kool-Rite Cooling Ready - NSF Approved Special Order 8755$283.68

Return to Top of page or
Tower Selection Page.

PVD Non Tarnshing Brass Draft Towers

These 3" draft beer dispensing towers and arms come with mounting hardware and 5 feet of 3/16 I.D. beer line, nut and nipple ready for connection to a keg coupler. These towers are in general about 12 inches tall with the spigot spout being about 9" to 10" from the mounting flange.
description Part Number Price
Micromatic PVD Brass draft tower, 1 Faucet w/hose Air Cooling - NFS Approved Special Order 8671$143.66
Micromatic PVD Brass draft tower, 2 Faucets w/hose Air Cooling - NFS Approved Special Order8672$210.86
Micromatic PVD Brass draft tower, 1 Faucets w/tube Kool-Rite Cooling Ready Special Order 8675$300.48
Micromatic PVD Brass draft tower, 2 Faucets w/tube Kool-Rite Cooling Ready Special Order 8674$346.66

Return to Top of page or
Tower Selection Page.

2½ inch Home replacement Draft Towers

This arm is perfect for replacing the Chinese arms accompanying some of the department store kegulators or just giving you tapster a new facelift. This is not considered proper for new home installations and never for use in any commercial application.
description Part Number Price
2½ inch Draught Technology Polished Chrome draft tower, 1 Faucets w/hose for Air Cooling - NFS Approved 8655 $72.26
2½ inch Micro Matic Polished S/S draft tower, 1 Faucets w/hose w/hose Air Cooling - NFS Approved Special Order8955 $112.95
2½ inch Polished Brass draft tower, 1 Faucets w/hose w/hose Air Cooling - NFS Approved Special Order8656 $122.19

Return to Top of page or
Tower Selection Page.

clamp on towers

3" Clamp-On Towers

The 3" diameter with one or two faucets and drip tray are a perfect way to add a draft beer tower to your cold box for a quick setup and tare down. Just put the keg under the bar and connect the tower leads to the cold box. All cold boxes except 8 quart box require a 5322 adapter on each line.
description Part Number Price
3" Chrome Clamp on draft tower 1 faucet w/hose Special Order 8961 $206.15
3" Chrome Clamp on draft tower 2 faucet, w/hose Special Order - Shown on Left 8962 $246.05
3" Brass Clamp on draft tower 1 faucet w/hose Special Order8963 $206.15
3" Brass Clamp on draft tower 2 faucet, w/hose Special Order8964 $246.05

Return to Top of page or
Tower Selection Page.

clamp on towers

4" Clamp-On Towers

The 4" diameter with three faucets and drip tray are a perfect way to add a draft beer tower to your cold box for a quick setup and tare down. Just put the keg under the bar and connect the tower leads to the cold box. All cold boxes except 8 quart box require a 5322 adapter on each line.
description Part Number Price
4" Chrome Clamp on draft tower 2 Faucet w/hose Special Order 8965$352.43
4" Chrome Clamp on draft tower 3 Faucet w/hose Special Order 8966$392.35
4" Corrugated Chrome Clamp on draft tower 3 Faucet, w/hose Special Order 8967$441.56
4" Brass Clamp on draft tower 2 faucet w/hose Special Order - Shown on Left 8968$354.00
4" Brass Clamp on draft tower 3 faucet w/hose Special Order 8969$392.57
4" Corrugated Brass Clamp on draft tower 3 faucet, w/hose Special Order 8970$445.58

Return to Top of page or
Tower Selection Page.

shotgun doublebarrel shot gun towers

3" Shotgun Towers

The 3" diameter Shotguns with two faucets for the fastest pitcher pours you can get.
description Part Number Price
3" Polished S/S ShotGun Doublebarrel pitcher dispenser w/hose Special Order 8971$317.79
3" Polished Brass ShotGun Doublebarrel pitcher dispenser w/hose Special Order 8971$473.21

Return to Top of page or
Tower Selection Page.

 

Return to Top of Page.

 

  Copyright © 1996 - 2009 Kegman LLC
 
Webmaster
 
Programming by Crossfire Engineering