Collection: Carbonators Motorized

All carbonators must have their ventable check valves vented to a drain to prevent flooding.  Otherwise the water level switch can be damaged by electrical surges or other physical damage.

Seltzer or carbonated water is manufactured and consumed in every part of the world. This sparkling beverage is both refreshing and medicinal. It is made with both motorized and non motorized carbonators.

Commercial Motor Carbonators are mechanical devices which use a motor to force water into a carbonation cylinder with a constant pressure of CO2 from a regulated CO2 cylinder to carbonate the water pumped into the carbonation chamber.   In flows water and CO2.  Carbonators output a continuous supply of wonderfully carbonated water.  Sanitation requirements are the same as for drinking water.

Note: The output seltzer temperature at the faucet or draft arm must be between 33 and 38 degrees F. for the proper retention of carbonation when the seltzer or soda is poured. Failure to have the seltzer cold will cause partial to total loss of carbonation.

This equipment is under pressure and can cause problems if not connected properly. If you have questions or concerns on your ability to connect the gear, hire a professional installer. Be careful buying from a beer only equipment re-seller.  Not all equipment sold by the BEER Focused companies will work well with seltzer.  We have been selling seltzer equipment for decades